KB Article #70791
All transfers fails with code 302 and success only when restarting the monitor
--Permission
--denied
--302
Sometimes, all transfers fails with a failure code 302.
No change has been done on the Transfer CFT configuration and transfers restarts if the monitor is restarted.
1/02/23 05:24:38 CFTH10E PART=XFPREXWI Network connect reject RECOV=9 L=0 R=9 D=d NET=TCP
11/02/23 05:24:38 CFTT75E PART=XFPREXWI IDF=EFEFIHM IDT=B2305243 connect reject 302 R 09 00d
Examining the cft.out , there is the message in loop :
+ 1/02/23 05:24:38 .132001 20412 CFTTCPS 13:23:52_E_S_socket : ddecon : Probablement network down dyna_port 6112 : Permission denied
Resolution
Solution 1:
Some ports may be forbidden by the administror system or reserved by the system.
to display port restriction see the network administrator
ndd /dev/tcp tcp_extra_priv_ports
Solution 2:
You may also update your monitor to the latest service pack of the releases 2.6.4 , 2.7.0 or 2.7.1
Now when a port is reserved, Transfer CFT moves on and try the next one.