-- These parameters are:
1. Network identifier of the receiving application
CFT: rappl
Gateway: rcv_appli

2. Local identifier of the user who received the transfer
CFT: ruser
Gateway: rcv_user

3.Network identifier of the sending application
CFT: sappl
Gateway: snd_appli

4. Local identifier of the user who sent the transfer
CFT: suser
Gateway: snd_user

-- By default, these parameters are not successfully received by a Remote Site in Gateway.
-- The objective is to receive these Pesit specific parameters and use them on Gateway side

1. Modify the Remote Site on Gateway side so that these parameters can be received successfully:
Remote Site properties - Tab: Pesit - Field: Message
In the Message field enter the following value:

CFT G=RAPPL H=SAPPL L=SUSER M=RUSER

and apply the changes.

2. Execute a Store and Forward transfer from CFT.
cftutil send part=END_RECEIVER, idf=BINAIRE,fname=e:\temp\certificats.zip,nfname=test.zip,sappl='TSAPPL12',suser='TSUSER12',parm='TESTPARM', ipart=Identifier_of_Intermediate_GW